Placed between the pump and injector, these filters protect the injector from pump seal wear material
and extend the life of the column prefilter. All filters are made from 316 stainless steel and are rated to 6,000
psi.
Filters include 10-32 compression fittings.
High Capacity In-Line Filters
This filter features a clean-swept internal volume and a large 2.2 cm 2 filter area that
will provide a long service life. Filter cartridges are available in 0.5 micron and 2 micron porosity, and are both
interchangeable and replaceable. Total internal volume is 100 µL for 0.5 micron filter, and 120 µL for 2.0 micron filter.
Ordering Information
Low Volume In-Line Filters
Recommended for applications where system volume must be kept to a minimum. Filter cartridges are
available in 0.5 micron and 2.0 micron porosity, are both interchangeable and replaceable, and have a 0.32 cm 2
active area. Full use of the filter surface is maintained by a 5° entrance cone. Total internal volume is 14 µL for
the 0.5 micron filter and 18 µL for the 2 micron filter.
