1-800-344-4340

info@HPLC-ASI.com

Analyical Scientific Instruments

Tubing

1/16 " OD Stainless Steel Capillary

ASI Capillary tubing is made from 316 stainless steel and is available in 25 ft. lengths; other lengths upon request. The tubing ID should be passivated after cutting as follows: 20 % nitric acid for 30 minutes, followed by distilled water rinse.

Ordering Information

Description ASI Part Number
SS Tubing 1/16” OD x 0.010” ID x 25 ft 800-0010
SS Tubing 1/16” OD x 0.020” ID x 25 ft 800-0020

Teflon (TFE) Tubing

Teflon Tubing provides unmatched solvent resistance for low pressure applications.

Ordering Information

Description ASI Part Number
Teflon (TFE) Tubing 1/16” OD x 0.030” ID x 25 ft 810-0030
Teflon (TFE) Tubing 1/8” OD x 1/16” ID x 25 ft 810-0063
Teflon (TFE) Thinwall Tubing 1/8” ID  x 25 ft 810-0125

PEEK Tubing

PEEK can be substituted for stainless steel tubing when contact with metal is a concern. It is inert to most HPLC solvents, will withstand intermittent operation up to 5,000 PSI, and continuous operation at 4,000 PSI. PEEK tubing should not be used at these pressures with DSMO,THF, or methylene chloride.

Ordering Information

Description ASI Part Number
PEEK Tubing 1/16” OD x 0.005” ID x 5 ft 820-0631
PEEK Tubing 1/16” OD x 0.010” ID x 5 ft 820-0632
PEEK Tubing 1/16” OD x 0.020” ID x 5 ft 820-0630