QuickSplit™
Makeup-Flow Splitter Manifolds

The ASI QuickSplit Makeup-Flow Splitter Manifold is designed for post-column applications where a small amount of flow from an HPLC column is efficiently combined with a makeup-flow before it reaches the detector. Although there are many variations of this type of application, one of the most common involves splitting a small portion of the outlet flow from a preparative HPLC column which is then combined and diluted with a makeup-flow. The combined makeup-flow is used by a detector, typically Mass Spec. or UV, to trigger fraction collection from the remaining flow. A minimum delay time of 5 seconds (maximum inlet flow) is built into the splitter to insure proper sequencing between detection and fraction collection. Unique integral design eliminates tees and fittings within the splitter, resulting in extremely low peak dispersion. An additional splitter can be added after the manifold to allow splitting the makeup-flow stream prior to entering the detector.

Custom configuration orders must include inlet flow, split ratio, and delay time. In order to assure <500 PSI pressure drop across the splitter, please specify the inlet flow when you order.

QuickSplit™ Makeup-Flow Splitter Manifold

 

Makeup-Flow Splitter Manifolds

Replacement Parts