QuickSpit™ Multiport Fixed Flow Splitter

Divides the incoming flow stream into 3 or 4 channels. The QuickSplit Multiport Flow Splitter is ideal for applications that use multiple detectors and/or a fraction collector. Split ratios can be configured to be identical in each channel or custom configured to accommodate specific flow rates at each channel. The low internal dead volume prevents excessive dispersion and the replaceable inlet filter insures robust operation. Available in models for analytical and semi-preparative inlet flow rates.

Please contact ASI for assistance in configuring your QuickSplit™ Multiport Fixed Splitter prior to ordering. Please specify inlet flow rate and desired output flow rate in each channel when you order.

Analytical Splitters - Multiport
Analytical range, 0.1mL/min. to 5 mL/min.  input flow

These splitters will produce under 500 PSI backpressure with water at 1.0 mL/min*. The backpressure will decrease in direct proportion to a decrease in flow rate.

*Flow rates higher than 1.0 mL/min. can be used, but may result in a higher pressure drop across the splitter.

Semi-Preparative Splitters - Multiport
Semi-Prep range, 5mL/min. to 40 mL/min. input flow

These splitters will produce under 500 PSI backpressure with water at 20.0 mL/min**. The backpressure will decrease in direct proportion to a decrease in flow rate.

** Flow rates higher than 20.0 mL/min. can be used, but may result in a higher pressure drop across the splitter.