Micro Flow Series cartridges: 0.5 µL, 1 µL, 2 µL, 5 µL, 10 µL and 25 µL are interchangeable and fit in all Micro Flow Series In-line, Binary tee and Ternary tee housings.
Delay volume specified below was calculated based on an ASI engineering drawing. The delay volume can be verified by injecting a sample at a known flow rate, then measuring the time this sample first appears at the exit of the mixer.
Back pressure varies directly with flow rate. For example, if the back pressure is 120 PSI at 100 µL/min., it will be 2.4 PSI at 5 µL/min.
PEEK fittings should be used and Stainless Steel fittings should NOT be used. PEEK fittings are not included. If you need the fittings, please order PEEK Fingertight Fitting for 1/16" Tube 800-0630 separately.
Current stock:
0
1 µL Biocompatible PEEK Static Mixer
US$725.00
Part Number: 401-0001B
- Specifications:
Port size: 10-32 CPI (standard HPLC fittings for 1/16" tube)
Maximum Operating Pressure: 3,000 PSI
Maximum Temperature Rating: 40 °C
Delay volume: 1 µL
Back pressure: < 120 PSI @ 100 µL/min. with water
- Part Number:
- 401-0001B
- Wetted Material:
- PEEK
